All scripts

#!/bin/bash

set -e

RED='\033[0;31m'
YELLOW='\033[1;33m'
GREEN='\033[0;32m'
LIGHT_BLUE='\033[1;34m'
NC='\033[0m'

prompt() {
    local PROMPT_MESSAGE=$1
    local DEFAULT_VALUE=$2
    read -p "$PROMPT_MESSAGE [$DEFAULT_VALUE]: " INPUT
    echo "${INPUT:-$DEFAULT_VALUE}"
}

confirm_clean_install() {
    echo -e "${LIGHT_BLUE}=================================================================${NC}"
    echo -e "${LIGHT_BLUE}                      phpMyAdmin Panel Installer v4.0 by VS-Shop${NC}"
    echo -e "${LIGHT_BLUE}=================================================================${NC}"
    echo -e "${YELLOW}This installation script requires a clean installation of Ubuntu 22.04.${NC}"
    echo -e "${YELLOW}If you believe this is a clean installation, please confirm by replying 'Y(es)'.${NC}"
    echo -e "${YELLOW}If it is not a clean installation, please reply 'N(o)' and reinstall the operating system.${NC}"
    echo -e "${LIGHT_BLUE}=================================================================${NC}"
    
    while true; do
        read -p "Is this a clean installation of Ubuntu 22.04? (Y/N): " response
        case $response in
            [Yy]* ) break;;
            [Nn]* ) echo -e "${RED}Please reinstall Ubuntu 22.04 and run the script again.${NC}"; exit;;
            * ) echo -e "${RED}Please answer with 'Y' (Yes) or 'N' (No).${NC}";;
        esac
    done
}

confirm_clean_install

echo -e "${YELLOW}Updating system...${NC}\n"
sudo apt update && sudo apt upgrade -y

echo -e "${YELLOW}Installing required packages...${NC}\n"
sudo apt install -y apache2 mysql-server php php-mysql phpmyadmin

echo -e "${YELLOW}Configuring phpMyAdmin...${NC}\n"
sudo phpenmod mysqli
sudo service apache2 restart

MYSQL_ROOT_PASSWORD=$(prompt "Enter a password for MySQL root user" "root")

echo -e "${YELLOW}Changing MySQL root authentication method to mysql_native_password...${NC}"

sudo mysql -u root -p"$MYSQL_ROOT_PASSWORD" -e "ALTER USER 'root'@'localhost' IDENTIFIED WITH mysql_native_password BY '$MYSQL_ROOT_PASSWORD';" 2>/dev/null
sudo mysql -u root -p"$MYSQL_ROOT_PASSWORD" -e "FLUSH PRIVILEGES;" 2>/dev/null

sleep 2

echo -e "${YELLOW}Configuring phpMyAdmin...${NC}"
sudo sed -i "s/127.0.0.1/localhost/" /etc/phpmyadmin/config.inc.php

…

#!/bin/bash

set -e

RED='\033[0;31m'
YELLOW='\033[1;33m'
GREEN='\033[0;32m'
LIGHT_BLUE='\033[1;34m'
NC='\033[0m'

prompt() {
    local PROMPT_MESSAGE=$1
    local DEFAULT_VALUE=$2
    read -p "$PROMPT_MESSAGE [$DEFAULT_VALUE]: " INPUT
    echo "${INPUT:-$DEFAULT_VALUE}"
}

confirm_clean_install() {
    echo -e ${LIGHT_BLUE}"=================================================================${NC}"
    echo -e ${LIGHT_BLUE}"               Pterodactyl Wings Installer for Debian 12 by VS-Shop               ${NC}"
    echo -e ${LIGHT_BLUE}"=================================================================${NC}"
    echo -e "${YELLOW}This installation script requires a clean installation of Debian 12 (Bookworm).${NC}"
    echo -e "${YELLOW}Please confirm you are running it on a fresh system.${NC}"
    echo -e ${LIGHT_BLUE}"=================================================================${NC}"
    
    while true; do
        read -p "Is this a clean installation of Debian 12? (Y/N): " response
        case $response in
            [Yy]* ) break;;
            [Nn]* ) echo -e "${RED}Please reinstall Debian 12 and run the script again.${NC}"; exit;;
            * ) echo -e "${RED}Please answer with 'Y' (Yes) or 'N' (No).${NC}";;
        esac
    done
}

confirm_clean_install

echo -e "${GREEN}Updating system and installing dependencies...${NC}"
apt update && apt upgrade -y
apt install -y curl sudo gnupg lsb-release ca-certificates

echo -e "${GREEN}Installing Docker (from official source)...${NC}"
curl -fsSL https://get.docker.com | bash

echo -e "${GREEN}Enabling Docker...${NC}"
systemctl enable --now docker

echo -e "${GREEN}Installing Wings...${NC}"
mkdir -p /etc/pterodactyl
ARCH=$(uname -m)
ARCH_TYPE=$([[ "$ARCH" == "x86_64" ]] && echo "amd64" || echo "arm64")

curl -L -o /usr/local/bin/wings "https://github.com/pterodactyl/wings/releases/latest/download/wings_linux_${ARCH_TYPE}"
chmod +x /usr/local/bin/wings

echo -e "${GREEN}Creating systemd service file for Wings...${NC}"
cat > /etc/systemd/system/wings.service <<EOF
[Unit]
Description=Pterodactyl Wings Daemon
After=docker.service
…

#!/bin/bash
# Pterodactyl Installer for Debian 12
# © 2026 Anthony Morales / VS-Shop
# Free to use and distribute with attribution

set -e

RED='\033[0;31m'
YELLOW='\033[1;33m'
GREEN='\033[0;32m'
LIGHT_BLUE='\033[1;34m'
NC='\033[0m'

prompt() {
    local PROMPT_MESSAGE=$1
    local DEFAULT_VALUE=$2
    read -p "$PROMPT_MESSAGE [$DEFAULT_VALUE]: " INPUT
    echo "${INPUT:-$DEFAULT_VALUE}"
}

confirm_clean_install() {
    echo -e ${LIGHT_BLUE}"=================================================================${NC}"
    echo -e ${LIGHT_BLUE}"              Pterodactyl Panel Installer for Debian 12 by VS-Shop${NC}"
    echo -e ${LIGHT_BLUE}"=================================================================${NC}"
    echo -e "${YELLOW}This script is built for a clean installation of Debian 12 (Bookworm).${NC}"
    echo -e "${YELLOW}Please confirm your system matches this requirement.${NC}"
    echo -e ${LIGHT_BLUE}"=================================================================${NC}"
    
    while true; do
        read -p "Is this a clean installation of Debian 12? (Y/N): " response
        case $response in
            [Yy]* ) break;;
            [Nn]* ) echo -e "${RED}Please reinstall Debian 12 and run the script again.${NC}"; exit;;
            * ) echo -e "${RED}Please answer with 'Y' (Yes) or 'N' (No).${NC}";;
        esac
    done
}

confirm_clean_install

DOMAIN=$(prompt "Enter the domain name you want to use for the Pterodactyl panel (e.g., panel.example.com)" "panel.example.com")

echo -e "${GREEN}Updating system and installing base dependencies...${NC}"
apt update
apt -y install curl gnupg apt-transport-https ca-certificates lsb-release software-properties-common sudo unzip git tar cron

echo -e "${GREEN}Installing PHP 8.3 and required extensions...${NC}"
# Add SURY PHP repository
echo "deb https://packages.sury.org/php/ $(lsb_release -cs) main" | tee /etc/apt/sources.list.d/sury-php.list
curl -fsSL https://packages.sury.org/php/apt.gpg | gpg --dearmor -o /etc/apt/trusted.gpg.d/sury-php.gpg

apt update
apt -y install php8.3 php8.3-{cli,common,gd,mysql,mbstring,bcmath,xml,fpm,curl,zip}

echo -e "${GREEN}Installing MariaDB, NGINX, Redis...${NC}"
apt -y install mariadb-server nginx redis-server

echo -e "${GREEN}Installing Composer...${NC}"
curl -sS https://getcomposer.org/installer | php
mv composer.phar /usr/local/bin/composer
…

#!/bin/bash
set -e

RED='\033[0;31m'
YELLOW='\033[1;33m'
GREEN='\033[0;32m'
LIGHT_BLUE='\033[1;34m'
NC='\033[0m'

prompt() {
    local PROMPT_MESSAGE=$1
    local DEFAULT_VALUE=$2
    read -p "$PROMPT_MESSAGE [$DEFAULT_VALUE]: " INPUT
    echo "${INPUT:-$DEFAULT_VALUE}"
}

confirm_clean_install() {
    echo -e ${LIGHT_BLUE}"=================================================================${NC}"
    echo -e ${LIGHT_BLUE}"          Pterodactyl Panel Installer v1.2.0 for Debian 12 by VS-Shop${NC}"
    echo -e ${LIGHT_BLUE}"=================================================================${NC}"
    echo -e "${YELLOW}This script is built for a clean installation of Debian 12 (Bookworm).${NC}"
    echo -e "${YELLOW}Please confirm your system matches this requirement.${NC}"
    echo -e ${LIGHT_BLUE}"=================================================================${NC}"
    
    while true; do
        read -p "Is this a clean installation of Debian 12? (Y/N): " response
        case $response in
            [Yy]* ) break;;
            [Nn]* ) echo -e "${RED}Please reinstall Debian 12 and run the script again.${NC}"; exit;;
            * ) echo -e "${RED}Please answer with 'Y' (Yes) or 'N' (No).${NC}";;
        esac
    done
}

confirm_clean_install

DOMAIN=$(prompt "Enter the domain name you want to use for the Pterodactyl panel (e.g., panel.example.com)" "panel.example.com")
ADMIN_EMAIL=$(prompt "Enter an email address for Certbot to use (for urgent renewal notices and security advisories)" "admin@example.com")

echo -e "${GREEN}Updating system and installing base dependencies...${NC}"
apt update
apt -y install curl gnupg apt-transport-https ca-certificates lsb-release software-properties-common sudo unzip git tar cron

echo -e "${GREEN}Installing PHP 8.3 and required extensions...${NC}"
echo "deb https://packages.sury.org/php/ $(lsb_release -cs) main" | tee /etc/apt/sources.list.d/sury-php.list
curl -fsSL https://packages.sury.org/php/apt.gpg | gpg --dearmor -o /etc/apt/trusted.gpg.d/sury-php.gpg

apt update
apt -y install php8.3 php8.3-{cli,common,gd,mysql,mbstring,bcmath,xml,fpm,curl,zip}

echo -e "${GREEN}Installing MariaDB, NGINX, Redis...${NC}"
apt -y install mariadb-server nginx redis-server

echo -e "${GREEN}Installing Composer...${NC}"
curl -sS https://getcomposer.org/installer | php
mv composer.phar /usr/local/bin/composer

echo -e "${GREEN}Creating Pterodactyl installation directory...${NC}"
mkdir -p /var/www/pterodactyl
cd /var/www/pterodactyl
…

#!/bin/bash

set -e

RED='\033[0;31m'
YELLOW='\033[1;33m'
GREEN='\033[0;32m'
LIGHT_BLUE='\033[1;34m'
NC='\033[0m'

prompt() {
    local PROMPT_MESSAGE=$1
    local DEFAULT_VALUE=$2
    read -p "$PROMPT_MESSAGE [$DEFAULT_VALUE]: " INPUT
    echo "${INPUT:-$DEFAULT_VALUE}"
}

confirm_clean_install() {
    echo -e ${LIGHT_BLUE}"=================================================================${NC}"
    echo -e ${LIGHT_BLUE}"           Pterodactyl Wings Installer for Debian 12 by VS-Shop      ${NC}"
    echo -e ${LIGHT_BLUE}"=================================================================${NC}"
    echo -e "${YELLOW}This installation script requires a clean installation of Debian 12 (Bookworm).${NC}"
    echo -e "${YELLOW}Please confirm you are running it on a fresh system.${NC}"
    echo -e ${LIGHT_BLUE}"=================================================================${NC}"
    
    while true; do
        read -p "Is this a clean installation of Debian 12? (Y/N): " response
        case $response in
            [Yy]* ) break;;
            [Nn]* ) echo -e "${RED}Please reinstall Debian 12 and run the script again.${NC}"; exit;;
            * ) echo -e "${RED}Please answer with 'Y' (Yes) or 'N' (No).${NC}";;
        esac
    done
}

confirm_clean_install

WINGS_DOMAIN=$(prompt "Enter the domain name you want to use for Wings (e.g., wings.example.com). Leave blank if not using a public domain for Wings." "")
if [ -n "$WINGS_DOMAIN" ]; then
    ADMIN_EMAIL=$(prompt "Enter an email address for Certbot to use for Wings (for urgent renewal notices and security advisories)" "me@anthony-morales.online") # Corrected default email
fi

echo -e "${GREEN}Updating system and installing dependencies...${NC}"
apt update && apt upgrade -y
apt install -y curl sudo gnupg lsb-release ca-certificates

echo -e "${GREEN}Installing Docker (from official source)...${NC}"
if ! command -v docker &> /dev/null; then
    curl -fsSL https://get.docker.com | bash
else
    echo -e "${YELLOW}Docker appears to be already installed. Skipping Docker installation.${NC}"
fi

echo -e "${GREEN}Enabling Docker...${NC}"
systemctl enable --now docker

echo -e "${GREEN}Installing Wings...${NC}"
mkdir -p /etc/pterodactyl
ARCH=$(uname -m)
ARCH_TYPE=$([[ "$ARCH" == "x86_64" ]] && echo "amd64" || echo "arm64")
…

#!/bin/bash

set -e

RED='\033[0;31m'
GREEN='\033[0;32m'
YELLOW='\033[1;33m'
NC='\033[0m' # Clear Color

LOG_FILE="/var/log/pterodactyl-remover.log"
REMOVED_COUNT=0

count_entries() {
    local target="$1"
    if [[ -d "$target" && ! -L "$target" ]]; then
        sudo find "$target" 2>/dev/null | wc -l
    elif [[ -e "$target" || -L "$target" ]]; then
        echo 1
    else
        echo 0
    fi
}

remove_path() {
    local target="$1"
    local count
    count=$(count_entries "$target")
    sudo rm -rf "$target" || true
    REMOVED_COUNT=$((REMOVED_COUNT + count))
}

echo -e "${YELLOW}WARNING: This script will completely remove your Pterodactyl, NGINX Web-Server Installation & Wings Configuration!${NC}"
read -p "If you would like to proceed, respond with (Y)es or (N)o: " response

if [[ $response =~ ^[Yy]$ ]]; then
    echo -e "${GREEN}Proceeding with the removal.${NC}"
    echo -e "${YELLOW}Welcome to VS-Shop Official Pterodactyl Remover for Ubuntu 18.04${NC}\n"
    sleep 2

    echo -e "${GREEN}Removing Panel & its files...${NC}"
    remove_path /var/www/pterodactyl
    sleep 2

    echo -e "${GREEN}Removing queue worker...${NC}"
    remove_path /etc/systemd/system/pteroq.service
    sleep 2

    echo -e "${GREEN}Removing NGINX Web-Server Configuration...${NC}"
    remove_path /etc/nginx/sites-enabled/pterodactyl.conf
    sleep 2

    echo -e "${GREEN}Stopping Wings...${NC}"
    sudo systemctl stop wings || true
    sleep 2

    echo -e "${GREEN}Removing Pterodactyl Game Files & Backups...${NC}"
    remove_path /var/lib/pterodactyl
    sleep 2

    echo -e "${GREEN}Removing Wings Config...${NC}"
…

#!/bin/bash

set -e

GREEN='\033[0;32m'
AQUA='\033[0;36m'
RED='\033[0;31m'
NC='\033[0m'

echo -e "${AQUA}Welcome to VS-Shop PufferPanel Installer 2.0! You are about to install PufferPanel on a fresh OS system."
echo -e "Let's get started with the installation process...${NC}"

read -p "Press [Enter] to continue or [Ctrl+C] to exit."

echo -e "${AQUA}Please enter your domain name for SSL configuration (e.g., panel.example.com):${NC}"
read DOMAIN

echo -e "${AQUA}Updating system packages...${NC}"
sudo apt-get update && sudo apt-get upgrade -y

echo -e "${AQUA}Installing curl...${NC}"
sudo apt-get install -y curl

echo -e "${AQUA}Adding PufferPanel repository...${NC}"
curl -s https://packagecloud.io/install/repositories/pufferpanel/pufferpanel/script.deb.sh | sudo bash

echo -e "${AQUA}Installing PufferPanel...${NC}"
sudo apt-get install -y pufferpanel

echo -e "${AQUA}Adding PufferPanel user...${NC}"
sudo pufferpanel user add

echo -e "${AQUA}Enabling and starting PufferPanel service...${NC}"
sudo systemctl enable --now pufferpanel

echo -e "${AQUA}Installing Nginx...${NC}"
sudo apt-get install -y nginx

echo -e "${AQUA}Configuring Nginx for your domain...${NC}"
cat > /etc/nginx/sites-enabled/pufferpanel.conf <<EOF
server {
    listen 80;
    root /var/www/pufferpanel;

    server_name $DOMAIN;

    location ~ ^/\.well-known {
        root /var/www/html;
        allow all;
    }

    location / {
        proxy_pass http://localhost:8080;
        proxy_set_header X-Real-IP \$remote_addr;
        proxy_set_header X-Forwarded-For \$proxy_add_x_forwarded_for;
        proxy_set_header X-Nginx-Proxy true;
        proxy_http_version 1.1;
        proxy_set_header Upgrade \$http_upgrade;
        proxy_set_header Connection "Upgrade";
        proxy_set_header Host \$host;
…